Design Inspiration Supplies

Design Instructions

faux-druzy-earrings-updated-1200px-w-logo.jpg

 

You may notice that there are heart bezels shown above. Those are regrettably no longer in production and this design and has been updated with our Flame Bezels!

Supplies needed

  • 2   GF French Hook w/2mm Bead Ear Wires    (90-3120-10)
  • 2   Flame Bezel Charm    (94-2512-25) 
  • Iced Enamels German Glass Glitter, Judikins Roxs or similar
  • UV Resin or Judikins Diamond Glaze (or similar)
  • Tissues

Tools

  • chain and/or flat nose pliers
  • triangle bead scoop
  • pin or toothpick
  • UV lamp if using UV resin.

Skill Level: Beginner

Finished Size: Approx. 1 1/4"

Designer: Tracy Proctor

Watch our technique videos on the TierraCast Blog (look for Jump Rings)

 

Note: Glass glitter is glass. Use care when handling.

 

Steps

  1. Apply ¼” drop of glaze into bottom of bezel.
  2. Use pin or toothpick to spread glaze around bottom.
  3. Use scoop to apply small amount of glitter into bezel.
  4. Use pin or toothpick to spread and arrange glitter as desired.
  5. Apply more glaze and/or glitter sparingly if needed.
  6. Repeat steps 1-5 with second bezel and allow adhesive/resin to cure per product instructions.
  7. Open loop on earwire and attach to heart charm.
  8. Repeat Step 7 for second earring.

See our helpful Pinterest tutorial here.

Download the Faux-tastic Druzy Earrings PDF