Design Inspiration Supplies

Design Instructions

ireland.png

 

Supplies needed: Earrings

  • 2    Medium Celtic Diamond Bead    (94-5524-26)

  • 2    Plain 18x13mm Pear Bezel Drop    (94-2541-25)

  • 2    Eye Pin 21 gauge 2"   (01-0027-09)

  • 2    French Hook Ear Wire w/2mm Bead, GF    (90-3120-10)

  • 2    European Crystal 4320 Pear Fancy Stone, 18x13mm, Olivine

  • 2    European Crystal 5328 Bicone Bead, 6mm, Crystal Vitrail Medium

  • 4    European Crystal 5328 Bicone Bead, 4mm, Crystal Metallic Sunshine 2X

  • Two-part epoxy glue 
  • Alcohol wipes

Supplies needed: Bracelet

  • 1    Open Round Pendant    (94-7505-12)

  • 2    Round Jump Ring 19 gauge 5.5mm ID    (01-0025-01)

  • 3    rings of memory wire

  • 1    European Crystal 6764 Clover Pendant, 23mm, Crystal Golden Shadow    

  • 36    European Crystal 5000 Round Beads, 8mm, Olivine

  • 18    European Crystal 5328 Bicone Bead, 6mm, Crystal Vitrail Medium

  • 57    European Crystal 5328 Bicone Bead, 4mm, Crystal Metallic Sunshine 2X

Tools:

  • round nose pliers
  • chain and/or flat nose pliers (2)
  • wire cutters
  • memory wire cutters

Skill Level: Beginner

Finished Size: Earrings - approx. 2”, Bracelet - adjustable

Designer: 

Watch our technique videos on the TierraCast Blog (look for Jump Rings and Simple Loops).

Steps - Earrings

  1. Using alcohol wipes clean off all the drop settings and set aside to dry.
  2. Using one 4320 Pear fancy stone glue into matching finding. Repeat once and set aside to dry for 24 hours.
  3. Using one eye pin attach to the Pear drop. Slide onto eye pin one 5328 6mm Crystal Vitrail Medium bicone bead, one 5328 4mm Crystal Metallic Sunshine bicone bead, one Celtic Diamond Bead, one 5328 4mm Crystal Metallic Sunshine bicone bead and make a simple loop. Attach ear wire. Repeat to make second earring.

Steps - Bracelet

  1. Using the memory wire make a loop at one end to close the wire. Slide on three 4mm 5328 Crystal Metallic Sunshine bicone beads, one 8mm 5000 Olivine round bead, one 6mm 5328 Crystal Vitrail Medium bicone bead, and one 8mm 5000 Olivine round bead. Repeat this pattern 17 more times, then slide on three 4mm 5328 Crystal Metallic Sunshine bicone beads and make another loop to close the bracelet.
  2. Using one jump ring attach the Clover pendant to one end of the bracelet and using another jump ring attach the Open Round pendant to the other end of the bracelet.

Download the Ireland Earrings & Bracelet PDF