Design Instructions

indian-pink-1000px.jpg 

Supplies needed

  • 6    SS34 Stepped Bezel Drop    (94-2450-61)

  • 2    Beaded 5-1 Link    (94-3056-12)

  • 7”    8x5mm Cable Chain    (20-0625-12)

  • 1    15x9mm Lobster Clasp    (01-0111-11)

  • 6    4mm Oval Jump Ring    (01-0018-01)

  • 1    8mm Jump Ring    (01-0020-01)

  • 1    2” Head Pin    (01-0028-01)

  • 8    2mm Crimp Beads    (01-0030-11)

  • 8    3mm Crimp Cover    (01-0032-11)

  • 6    Swarovski 2088 SS34 Flat Back Crystal, Indian Pink
  • 78    Swarovski 5000 4mm Round Crystal Bead, Indian Pink
  • 47    Swarovski 5000 6mm Round Crystal Bead, Indian Pink 
  • 36”    beading wire

  • Alcohol wipes

  • Swarovski CG500 Two Part Epoxy Glue

       

Tools

  • round nose pliers
  • chain and/or flat nose pliers (2)
  • wire cutters

Skill Level: Beginner

Finished Size: Approx. 7 1/2”

Designer: Swarovski Create Your Style

Watch our technique videos on the TierraCast Blog (look for Jump Rings, Crimping, and Simple Loops).

Steps

  1. Using alcohol wipes clean all the findings and set aside to dry.
  2. Using one 2088 ss34 Flatback glue into matching bezel setting and set aside for 24 hours to dry. Repeat 5 more times and set aside.
  3. Cut chain into one 1” piece and one 6” piece. Set aside.
  4. Cut stringing wire into four 9” pieces and set aside.
  5. Using one piece of stringing wire slide on one crimp bead and attach to hole #1 on the Beaded Link. Crimp to close. Add crimp cover. Slide on one 4mm 5000 bead, twenty three 6mm 5000 beads, one 4mm 5000 bead and one crimp bead. Attach to hole #1 on the other Beaded Link. Crimp to close. Add crimp cover. Repeat this step attaching the strand to hole #5 on the Beaded Links.
  6. Using one piece of stringing wire slide on one crimp bead and attach to hole #2 on the Beaded Link. Crimp to close. Add crimp cover. Slide on thirty seven 4mm 5000 beads and one crimp bead. Attach to hole #2 on the other Beaded Link. Crimp to close. Add crimp cover. Repeat this step attaching the strand to hole #4 on the Beaded Links.
  7. Using the 6” piece of chain open one link at each end and attach to holes #3 on the Beaded Links. Using a 4mm oval jump ring randomly attach the drops made in Step 2 to the chain.
  8. Using one head pin slide on one 6mm 5000 bead and make a simple loop. Attach this bead to the end of the 1” piece of chain. Using the other end of the chain open the last link and attach to the end of the Beaded Link.
  9. Using the 8mm jump ring attach the lobster clasp to the other end of the Beaded Link.

Download the Pretty in Pink Bracelet PDF