Supplies needed
- 2 2mm Bead Silver Filled Earwire (90-8120-10)
- 2 Intermix 3 Ring Bar (94-3214-12)
- 2 Intermix 1 Ring Link (94-3215-12)
- 10 Oval Jump Ring 20 Gauge 3x2mm ID (01-0016-01)
- 8 Oval Jump Ring 20 Gauge 4x3mm ID (01-0018-01)
- 2” 1.25mm Brass Cable Chain (20-1625-63)
Tools
- chain or flat nose pliers (2)
- wire cutters
- beading awl
Skill Level: Intermediate
Finished Size: Approx. 3 1/2"
Designer: Tracy Gonzales
Download the Stardust Earrings PDF
Watch our technique videos on the TierraCast Blog (look for video on jump rings).
Tip: To ensure that the jump rings will fit through the small links in this chain, insert the awl into a link and push link firmly down to stretch it open.
Steps
- Cut two ¾” and two ¼” pieces of chain. Use awl to stretch open the end links of each piece (see tip). Set aside.
- Open one small jump ring and attach it to one 3 Ring Bar. Close jump ring.
- Open one medium jump ring and attach it to the small jump ring in Step 2. Close jump ring.
- Open one small jump ring and attach it to the medium jump ring in Step 3. Before closing jump ring, string on one ¾” piece of chain. Close jump ring.
- On the other end of the chain attach one small jump ring. Close jump ring.
- Attach one medium jump ring to the small one in Step 5. Before closing the jump ring, attach it to one 1 Ring Link. Close jump ring.
- Attach a second medium jump ring to the 1 Ring Link. Close jump ring.
- Attach one small oval jump ring to the medium jump ring from Step 7. Before closing the jump ring, string on one ¼” piece of chain.
- On the other end of the chain, attach one small jump ring. Close jump ring.
- Attach one medium jump ring to the small one in Step 9. Before closing the jump ring, attach it to one ear wire. Close jump ring.
- Repeat all steps for second earring.