Design Inspiration Supplies

Design Instructions

dsc08230.jpg

 

Supplies needed

  • 1    Craftsman Clasp    (94-6205-70)
  • 36    7mm Nugget Spacer Bead    (93-0436-70)
  • 24    European Crystal 5000 Round Bead, 3mm, Aquamarine
  • 24    European Crystal 5000 Round Bead, 6mm, Aquamarine Shimmer
  • 49    European Crystal 5000 Round Bead, 8mm, Aquamarine Shimmer
  • 24    European Crystal 5040 Rondelle (Briolette) Bead, 8mm, Aquamarine
  • 24    European Crystal 5328 Bicone Bead, 4mm, Aquamarine Shimmer
  • 8    European Crystal 86001 Pave Bead, 8mm, Aquamarine
  • 24    European Crystal 5810 Crystal Pearl, 6mm, Crystal Turquoise
  • 2    3mm crimp tubes
  • 2    4mm crimp covers    
  • 96"    Stringing wire

Tools

  • wire cutters
  • crimping pliers (large)
  • chain and/or flat nose pliers (2)

Skill Level: Beginner

Finished Size: Approx. 32”

Designer

Watch our technique videos on the TierraCast Blog (look for Crimping).

Steps

  1. Cut stringing wire into three 32” pieces.
  2. Using all three wires together string on one Pave Bead, two 8mm 5000 Aquamarine Shimmer beads, one nugget bead, three 8mm 5000 Aquamarine Shimmer beads, one nugget bead, three 8mm 5000 Aquamarine Shimmer beads, one nugget bead, three 8mm 5000 Aquamarine Shimmer beads, one nugget bead, two 8mm 5000 Aquamarine Shimmer beads and one Pave Bead.  Position all these in the center of the three strands of wire.
  3. Starting with the right side of the necklace, and only using one of the three wires coming out of the pave bead, string on one 3mm 5000 Aquamarine bead, one 4mm 5328 Aquamarine Shimmer bicone bead, one 6mm 5000 Aquamarine Shimmer bead, one Turquoise pearl, one 8mm 5040 Aquamarine bead, one nugget bead, one 8mm 5000 Aquamarine Shimmer bead, one nugget bead, one 8mm 5040 Aquamarine bead, one Turquoise bead, one 6mm 5000 Aquamarine Shimmer bead, one 4mm 5328 Aquamarine Shimmer bicone bead and one 3mm 5000 Aquamarine bead.  Repeat this two more times for the two remaining open wires.
  4. Now take all three wires together again and slide on one Pave Bead, two 8mm 5000 Aquamarine Shimmer beads, one nugget bead, one 8mm 5000 Aquamarine Shimmer bead, one nugget bead, two 8mm 5000 Aquamarine Shimmer beads and one Pave Bead
  5. Repeat Step 3.
  6. Now take all three wires together again and slide on one Pave Bead, two 8mm 5000 Aquamarine Shimmer beads, one nugget bead, three 8mm 5000 Aquamarine Shimmer beads, one nugget bead, and two 8mm 5000 Aquamarine Shimmer beads.  Using all three wires slide on one crimp bead and one end of the toggle.  Crimp to close and add crimp cover.
  7. Repeat Steps 3 – 6 to make left side of the necklace.

Download the Triple Ocean Waves Necklace PDF