Design Inspiration Supplies

Design Instructions

monstera-earrings-1200px.jpg

 

Supplies needed

  • 2    Monstera Charm    (94-2577-18)
  • 4    Small Woodland Spacer Bead    (94-5649-18)
  • 2    Eye Pin 22ga 2"    (01-0035-18)
  • 2    Niobium French Hook Ear Wire w/Coil    (90-5128-12)
  • 2    Oval Jump Ring 17ga 5x3.5mm ID    (01-0019-01)
  • 2    Czech Glass Fire Polish 9x6mm Rondelle Bead    (Olivine Ivory Mix Opaque Transparent Picasso shown)

Tools

  • chain nose pliers (2)
  • round nose pliers
  • wire cutters

Skill Level: Beginner

Finished Size: Approx. 2"

Designer: Tracy Proctor

Download the Monstera Earrings PDF

 

Watch our technique videos TierraCast Blog (look for Simple Loops and Jump Rings).

Steps

  1. String 1 spacer bead, 1 rondelle bead, and 1 spacer bead onto 1 eye pin.
  2. At top of last bead bend wire over at right angle. Use wire cutters to trim to about 3/8", then use round nose pliers to form simple loop.
  3. Open loop at 1 end and attach monstera charm. Close loop.
  4. Open loop at other end and attach ear wire. Close loop.
  5. Repeat Steps 1-4 for second earring.