Design Instructions



Supplies needed

  • 6    Palace Cord End 2mm    (94-5845-12)
  • 4    Temple Cord End 2mm    (94-5850-12)
  • 55    Nugget Large Hole Spacer Bead 5mm    (93-0449-27)
  • 5    Lobster Clasp 12x7mm    (01-0110-11)
  • 10    Oval Jump Ring 20ga 3x2mm    (01-0016-01)
  • 5    Round Jump Ring 16ga 5mm    (01-0020-01)
  • 5    6" pieces 2mm round leather cord, assorted colors
  • Super New Glue or preferred adhesive


  • scissors
  • chain and/or flat nose pliers (2)
  • large crimping pliers (optional)

Skill Level: Beginner

Finished Size: Approx. 7"

Designer: Tracy Gonzales

Watch our technique videos on the TierraCast Blog (look for Jump Rings and Cord Ends).

Tip: For optional crimping instead of gluing - use large crimping pliers or chain nose pliers to squeeze the cord end firmly on the recessed area until secure. 

Steps for one bracelet

  1. If using adhesive to secure cord ends, apply small drop of glue into one cord end. Insert one end of one piece of cord. Allow to dry. If crimping use chain nose or crimping pliers to crimp until secure.
  2. String 11 spacer beads onto cord. 
  3. Repeat Step 1 to secure second cord end. 
  4. Open one oval jump ring and attach to loop at one end of bracelet. Before closing attach loop of one lobster clasp. Close jump ring. 
  5. Repeat Step 4 at other end, adding closed round jump ring before closing oval jump ring.

Download the Sweet & Simple Bracelet Stack PDF